Auto Gas Releasing Control Panel
NEW PE-GRP-300i
Fire Hazard Solution
AUTO GAS RELEASING CONTROL PANEL Program Auto Gas Releasing Control Panel GRP-300i Series manufactured in accordance with FM 3010:2021 and conformed to local CIFS requirement.
The GRP-300i Gas Release Panel has been designed as a control panel for use in automatic fire suppression systems. The panel is a feature-packed control unit suitable to perform detection and control functions associated with the release or discharge of gaseous agent or special hazard fire protection systems.
It is designed for maximum reliability with 100% solid state circuitry and isolated relay contacts for outside interfa- cing and features an LCD with keypad to allow on-site customization of the unit for various operating configurations.
An integral standby battery system, with charger, is provided. In case of commercial AC power interruption, automa- tic switchover to the battery system. The control panel is supplied complete with enclosure, hinged door, control keypad, LCD and indicator LEDs.
The entire unit is housed in a compact enclosure finished with signal red polyester epoxy powder paint.
- New Features
- Microprocessor Base
- LCD Display Interface
- Fully Membrane Keypad Switch
- 2 + 1 Zone for up to 3 Zone Auto Gas Releasing Panel
- Keyswitch Access and Access Level Password
- Over Voltage and Overload Protection
- Intelligent Charger and Over Discharge Protection for Battery
- Full Data Logging with RTC Date and Time stamp
- Extra Dry Contact & 24V Output (Programmable)
- Accept Universal AC supply 100V to 240V, 50/60Hz
- Support “PE-Cloud” (In-House IOT System)
- Dimension
|
Cabinet dimension |
(W 400 x H 400 x D 130) size in mm |
|
No. of Zones |
3 |
|
Model |
PE-GRP 300i |
|
All Dimensions Tolerance are +/- 5 mm |
|
| Power Supply Input | |
|---|---|
|
AC Input |
110/240V AC, 50/60Hz |
|
AC Fuse |
250VAC, 2A |
|
DC Output |
28.5VDC, 500mVp-p Ripple/Noise, 2.5A Current Limiting |
| Battery | |
|---|---|
|
Type |
12V DC Sealed Lead-Acid |
|
Low Battery Shutdown |
<20VDC |
|
Battery Fuse |
250VAC, 5A |
| Zone Circuits | |
|---|---|
|
Operating Voltage |
20V to 30V DC |
|
Short Circuit Current |
30mA Max |
|
End-of-Line Resistor |
8.2KΩ, 1⁄4-Watt |
|
Supervisory Current |
3.5mA per zone |
| Output Circuits | |
|---|---|
|
Operating Voltage |
20V to 30V DC |
|
NAC |
200mA Regulated, ±5% |
|
Releasing/Discharge Current |
800mA Regulated, ±5% |
| Flashing Light | |
|---|---|
|
Operating Voltage |
20V to 30V DC |
|
Max Current |
2A |
| Relay Outputs | |
|---|---|
|
Operating Voltage |
20V to 30V DC |
|
Max Current |
2A |
| Buzzer | |
|---|---|
|
Sound Output |
85dB at 10cm @ 2400Hz |
| LCD Display | |
|---|---|
|
Display Type |
128 x 64-pixel |
| Enclosure | |
|---|---|
|
Material |
Metal Cabinet and Base |
